Junger-audio D*AP8 Digital Audio Processor Manuel d'utilisateur télécharger pdf (Page 53)

D*AP8

Setup GUI – DOLBY PROCESSING – optional Dolby E encoder – Encoder A

If the optional Dolby E encoder is licensed (see SYSTEM > Firmware Update

> Licensing)

the UI shows it as Encoder A:

Encoder

Encoder Mode [Dolby E]

Encoder Status [Active / Metadata

Reversion / Fail]

Program [3x2 / 4x2 / 5.1 / 5.1 +2]

Configuration Set by the generator

Frame Rate [25 / 30 / 29,97 / Unknown]

Bit Depth [20 bits / 16 bits]

Metadata Reversion [Normal / Reversion]

Status

Metadata Bitstream [Normal / Fail]

Status

Video Frame Sync [present at Dolby E frame

Status rate]

Setup GUI – DOLBY PROCESSING – optional consumer format encoder – Encoder B

The D*AP8 offers the option to install a consumer format (Dolby Digital / Dolby Digital plus / HE-AAC

(v1/v2) / AAC) or another optional Dolby E encoder. If an encoder is installed it shows up under

DOLBY PROCESSING. This example has a consumer format encoder installed:

The OEM module from Dolby called CAT561. The implementation for the D*AP8 platform provides two

encoded outputs. Both outputs may have independent consumer formats. If both encoders are set for

Dolby Digital plus encoding special features like providing associated services (e.g. an extra audio track

for visually impaired people, AKA audio descriptive service - AD) are available.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 99 100

Pas de commentaire

Junger-audio D*AP8 Digital Audio Processor Manuel d'utilisateur Page 53